VLAN Trunking Protocol (VTP) - (၁)

Switch ပေါင်းများစွာ interconnected လုပ်ထားတဲ့ network environment ကို administration လုပ်ရတဲ့ အလုပ်ဟာ အလွန်ရှုပ်ထွေးပါတယ်။
ဒီလို switch များစွာကို manage လုပ်ဖို့ အတွက် Cisco ကနေ VLAN Trunking Protocol (VTP) ဆိုတာကို develop လုပ်ပေးခဲ့ပါတယ်။
ဒီ solution က Switch တွေ အချင်းချင်း ရဲ့ VLAN configuration information တွေကို exchange လုပ်ဖို့ အသုံးပြုပါတယ်။
VTP ဟာ Layer 2 trunk frame များကို သုံးပြီး VLAN information တွေကို exchange လုပ်ပါတယ်။
VTP က VLAN name များ ပြောင်းလဲခြင်း၊ VLAN name များထပ်နေခြင်း သို့မဟုတ် VLAN type setting များ မမှန်မကန်ဖြစ်နေခြင်း အစရှိတာတွေကို minimize ပြုလုပ်ခြင်း၊ VLAN များအား add or delete လုပ်ခြင်း စ တာတွေကို လဲ manage လုပ်ပါတယ်။

VTP ကို VLAN requirement တွေ common ဖြစ်တဲ့ management domain သို့မဟုတ် area တွေမှာ organize လုပ်ပါတယ်။
Switch တလုံးဟာ VTP domain တခုကိုပဲ ပိုင်ဆိုင်နိုင်ပါတယ်။
မတူညီတဲ့ VTP domain များမှာရှိတဲ့ switch များဟာ VTP information များကို share မလုပ်ကြပါဘူး။
VTP domain တခုအတွင်းမှာ ရှိတဲ့ Switch များဟာ သူတို့ရဲ့ domain neighbor တွေကို sever attribute များအား advertise လုပ်ပါတယ်။
Advertisement တခုချင်းစီမှာ VTP management domain, VTP configuration revision number, known VLANs နှင့် specific VLAN parameter များ၏ information များ ပါဝင်ပါတယ်။

Switch တခုပေါ်မှာ VLAN တခု စတင် create လုပ်တာကနေ စ တဲ့ VTP process ကို VTP server လို့ခေါ်ပါတယ်။
VTP floods advertisement ကို VTP domain ထဲမှာ ၅ မိနစ်ကို တကြိမ် သို့မဟုတ် VLAN configuration ပြောင်းလဲသွားတိုင်း advertise လုပ်ပါတယ်။
VTP advertisement မှာ VLAN configuration revision number, VLAN name နှင့် number, ဘယ် Switch ရဲ့ ဘယ် Port များကတော့ မည်သည့် VLAN အဖြစ် သတ်မှတ်ထားပါတယ်ဆိုတဲ့ information တွေ ပါဝင်ပါတယ်။
တစ်လုံး သို့မဟုတ် တစ်လုံးထက်ပိုသော VTP server များပေါ်မှာ detail VLAN configuration များကို configure လုပ်ပြီး configured information များအား advertisement  လုပ်ပေးလိုက်ခြင်းဖြင့် switch များကို VLAN များ၏ name and number များ သိစေပါတယ်။

ဆက်ပါအုံးမယ်...

ပျော်ရွှင်ပါစေဗျာ။
(Be knowledgeable, pass it on then)

No comments :

Post a Comment